The lnstaRack is a simple, one-piece racking solution for flat commercial rooftops, which is compatible with most framed photovoltaic modules on the market today.
- Simple and Innovative Design: requires only 1 tool for assembly
- Quick Installation: up to 2 kW per person per hour
- Universal System: compatible with modules 30” - 44” in width
- Integrated Grounding: only run wires at end of row
- Flexible Design: contours and adjusts to roof obstacles
- Wind Tunnel Tested: in accordance with ASCE 7-05; 120 MPH Rating
- Fully Ballasted: easy to disassemble for reroofing
- Low Weight: average 4-8 psf
- Optional Mechanical Attachments: for seismic requirements
- Engineering Support: layouts, wind and ballast engineering included
- High Density Polyethylene (HDPE): very robust, flexible, non-conductive and resistant to ultra violet light
- Stackable Design: low shipping cost
- Made In The USA: ARRA and “Buy American” compliant
InstaRack 10
InstaRack 15
Installation Options:
| Product Name |  |
 |
| Product Image |  |
 |
| Tile Angle | 10° | 15° |
| Compatible Modules |
All framed modules 37.3” - 44” in width (948 mm and 1117 mm) |
All framed modules 30” - 42” in width (762 mm and 1067 mm) |
| Dimensions |
(LxWxH) 64.3” x 17.4” x 11.7” 1633 mm x 442 mm x 297 mm |
(LxWxH) 72.4” x 17.4” x 13.4” 1839 mm x 442 mm x 340 mm |
| Row Spacing |
Maximum: 62” (1575 mm) Minimum: 52.5” (1334 mm) |
Maximum: 69” (1750 mm) Minimum: 65” (1650 mm) |
| Weight | 12 lbs. (5.4 kg) | 17 lbs. (7.7 kg) |
| Ballast Requirements | 4” x 8” x 16” CMU (31.5 lbs each) Based on ASTM Designation C1491 – 01a. | |
| Material | High-Density Polyethaylene (HDPE) Minimum 35% recycled content | |
| Module Orientation | Landscape | |
| Wind Load Criteria | Meets ASCE 7-05 up to 120 MPH | |
| UL Material Rating | UL 94-HB | |
| Warranty | 25 Years | |
| Install Manual |  Full InstaRack Install Manual (PDF, 3.5MB) |
|