Please login into your account. Register or Login

*ASCE 7 ground snow load (PSF).
Solar Power

Project Creation Instructions

To create a project follow these steps:-

1: Log into your account. To create an account select
Login and Register.
2: Select Design Configurator.
3: Enter the project address in the "Popup" window of
the "Design Configurator" menu.
4: Select English/Metric unit of measurement.
5: Select “Start Project Design”.
6: Fill out all tabs.
7: Setback will outline roof.
8: Select the "SYSTEM" tab and chose the FastRack
and Solar Module with Thicknessfrom the list.
NOTE: If the module is not available in the list then
select the "OTHER" option and provide the module
detail. We will add that module so that you can
draw the Solar Design by using that module.
9: Fill all the mandatory fields marked as *.
10: Click on Drawing tools to access drawing tool.
11: Click on southern corner of roof and draw line
across *note, first line drawn is direction solar array
will be tilted towards.
12: Select the "PROJECT REVIEW" tab to finalise the
drawing map.
13: Draw lines around roof within the setback line.
14: Click on Drawing button button and array will auto
populate.Module Selection can be changed at this
stage for comparison purposes.
15: Click on "Approve the Project" Button and then click
on "Submit" button.
16: Click on modules to remove or replace them in the
array where obstacles are located.

The first line segment should be at the Top or Bottom of the roof. The direction of the PV panel is on the First Line Segment